- Size : 2600*1400*2150
- Cutting Thickness : 13mm
- Cutting Width : 1350mm A machine that cuts the plate by the cross movement of two connected cutting blades.

- Size : 1100*1000*1880
- Blade Speed : 15~90m/min
- Distance from pillar to saw blade : 450mm
- Max working thickness : 190mm A machine that spins a saw blade to cut wood or metal.

- Size : 1797*1263*863
- Blade diameter : 254 mm
- Diameter of the diameter : 16 mm
- Number of spindle rotations : 3,850 RPM
- Turn on saw blade right maximum : 914 mm
- Turn on saw blade left maximum : 228 mm A machine that cuts wood through the rotation of a circular saw mounted under the surface of a table.

- Size : 790*565*610
- Blade diameter : 305 mm , internal diameter 30 mm
- No-load speed : 3,800 RPM
- Rated power input : 1,800 w A machine used to cut lumber, etc., or to cut miter joint.

- Size : 187*413*302
- Output amperes : 15 ~ 45 A
- Maximum input amperes : 34 A A machine that uses plasma to cut metal.

- Size : 3000*450*1000
- Invilatory power : 490kN
- TUBE/PIPE
- Maximum outside diameter : 140 mm
- Maximum Inbill Length : 18000 mm A machine for making long tubes or round rods by drawing metal out of holes.

- Size : 950*430*1500
- Roller : 3.5 HP
- Workable Dimensions : plate material 0.1 ~ 195mm Width 170mm wire material 1 ~ 20mm A processing machine for making plates and wires by thinning soft metals (gold, silver, copper).

- Size : 460x470x1170
- Roller : 1 HP
- - Workable Dimensions : plate material 0.1 ~ 8 mm wire material 1.4 ~ 8 mm A processing machine for making plates and wires by thinning soft metals (gold, silver, copper).

- Size : 1800*360*860
- Length of use : 1450mm
- Bendable Thickness : 3mm
- Minimum bending size : 90mm A processing machine that rolls iron plates round using rollers.

- Size : 620*400*920
- Round bar and pipe available size : ∅5/8/10/15/20
- Each pipe available size : 8/15/20
- Minimum bending size : 90mm A processing machine that rolls a pipe round using a roller.

- Size : 960*1160*1920
- Inflow Unit : 7.5 HP
- Pressurization capability : 15 Ton
- Stroke : 500 mm A molding machine that uses two or more corresponding tools (mold, shear blade, etc.) to place a processing material such as metal or nonmetal between the tools and operate a slide by fluid pressure to compress the processing material with strong force.

- Size : 750*900*1350
- Internal workspace : 700*580
- Pressure of use : 0 ~ 7 kgf/㎠
- Intakeable, cartridge filter dust collection: 0,4 kw A machine that sprays small-diameter glide glass spheres, silicon, marine, etc. into the air, or drops them under gravity to polish, rust, or process the material surface.

- Size : 600*500*740
- Grinding whetstone maximum speed : 2000 m/min
- Number of rotations : 3,450 RPM
- Operating speed : 96㎧
- Rated time : 30 minutes Wheels are attached to both ends of the motor rotating shaft with a flange between them. If you attach an A-type whetstone wheel to one flange, you can grind cutting tool blades such as drills or bytes made of high-speed tool steel (SKH). If a C-type whetstone wheel is attached to the other side, it is possible to process hard metal tools or hardwood materials.

- Size : 600*380*510
- Motor : 1½ HP
- Number of rotation : 2,830 RPM
- - Belt size : 6” X 48” A machine used to polish the surface of a workpiece by rotating a seamless belt-type abrasive cloth.

- Size : 630*460*620
- A glossy motor : 1/4 HP
- A dust collection motor : 1/8 HP Processing machines such as trimming, scale removal, polishing, and polishing of the exterior of metal and other workpieces using buff wheels that are electrified by power.

- Size : 410*410*650
- Tumbler Size : 265*105
- Motor : DC 1/2 HP A machine that uses magnetic force to rotate pins and pat objects dozens of times per second to perform trimming and polishing in a short time.

- Size : 740*390*310
- Motor : 600 W
- Rotation diameter : ∅180 mm
- Center width : 300 mm
- Center Height : 90 mm
- The width of a bed : 100 mm
- Spindle hole : ∅21 mmv
- Spindle taper : MT3
- Spindle speed : 150 ~ 2,500 RPM Machine tools that rotate the workpiece to process the outer circumferential cross section, etc.

- Size : 1110*500*1200
- Motor : 750 W
- Rotation diameter : ∅250mm
- Center width : 500 mm
- Center Height : 125 mm
- The width of a bed : 135 mm
- Spindle hole : ∅26 mm
- Spindle taper : MT4
- Spindle speed : 300 ~ 4,000 RPM Machine tools that rotate the workpiece to process the outer circumferential cross section, etc.

- Size : 1240*556*630
- Motor : 750 W
- Rotation diameter : ∅280mm
- Center width : 600 mm
- Center Height : 130 mm
- The width of a bed : 160 mm
- Spindle hole : ∅26 mm
- Spindle taper : MT4
- Spindle speed : 300 ~ 2,500 RPM Machine tools that rotate the workpiece to process the outer circumferential cross section, etc.

- Size : 594*740*596
- Motor : 500 W
- Bed length : 460
- The width of a bed : 120
- Vertical Transfer Distance : 105 mm
- Forward and backward transfer distance : 92 mm
- Left and right transfer distances : 300 mm
- Spindle speed : 200 ~ 2,000 RPM A machine that rotates a milling cutter to cut a workpiece that has been subjected to linear transfer motion up, down, left, right, and back and forth.

- Size : 1100*800*1320
- Motor : 2.2 Kw
- Bed length : 750
- The width of a bed : 210
- Vertical Transfer Distance : 470 mm
- Forward and backward transfer distance : 245 mm
- Left and right transfer distances : 450 mm
- Spindle speed : 100 ~ 2,800 RPM A machine that rotates a milling cutter to cut a workpiece with linear transfer motion up, down, left, right, and back and forth.

- Size : 580*1040*1220
- Laser energy : 100J
- Pulse width : ≤20ms
- Pulse Frequency : ≤50HZ
- Beam diameter : 0.1 ~ 3 mm Welder that allows you to do soldering using small and sophisticated lasers.

- Size : 80*80*510
- Welding capacity : 5 ~ 30 (ws)
- Weld spot diameter : 1.0 ~ 1.5 mm Welder that enables quick and accurate soldering using electricity.

- Size : 350*730*545
- Welding method : TIG
- Output current : 10 ~ 400 A
- Input Capacity : 13.3 KW A machine capable of welding the base material by generating an arc between the tungsten electrode and the base material in an inert gas such as argon or helium.

- Size : 550*400*1450
- A pump motor : 2 HP A machine that removes gypsum from the casting body and flask using water pressure after casting.

- Size : 1070*610*630
- Suction capacity : 150 L Machines used for vacuum degassing and plaster filling during casting operations.

- Size : 520*450*900
- Interior space : 200*200*210
- Capacity : 2.5kw A machine used to harden plaster in a flask and burn wax.

- Size : 265*160*240
- Capacity : 200w A machine that removes foreign substances attached to the surface of an article in a solvent subjected to ultrasonic vibration.

- Size : 740*700*1500
- Work area : 300*300
- Engraving speed : ≤10,000 mm/s
- Engraving depth : ≤1 mm
- Minimum line width : -0.01 mm A machine used to engrave letters or patterns on metal surfaces.

- Defoam machine size : 500*500*600
- Vacuum pump size : 350*610*480
- Motor : 2 HP A machine used to vacuum resin, silicon, gypsum, etc. to remove air bubbles.

- Size : 330*455*900
- Tank capacity : 2L A machine that allows cleaning and polishing of welding stains on the surface by electrochemically dissolving the metal surface as an anode.

- Size : 560*360*320
- Printing method : Digital Light Processing(DLP)
- Work area : 120*67.5*150
- Layer thickness : 0.025 ~ 0.05 mm
- Output speed : 10 mm/h
- Resolution : 1920*1080 pixel
- Output material : Resin It is a 3D printer that hardens the entire floor at once, like exploding a camera flash using ultraviolet lamps and dimming devices, and is used to model jewelry or draw wax for casting.

- Size : 255*255*352
- Maximum hardening size : 180*180*200
- A light source : UV LED 355 ~ 425 nm
- Turntable load : 1.5 kg
- Working environment : 15 ~ 30 ℃
- Curing time : 1 ~ 60 minutes (Timer available) A machine that hardens 3D printed resin work with a UV lamp.

- Size : 400*450*1820
- Power : 2200W
- Temperature : 0 ~ 100℃
- Timer : 0 ~ 60 minutes A machine that dries objects using infrared rays from infrared lamps or suitable heating bodies without directly using heating and drying gases.